DISCLAIMER
This is a Do It Yourself Project. Build and use this lamp at YOUR OWN RISK. This project uses electrical components which are only valid in the United States where the 110V AC standard is used. If incorrectly configured 110V AC can cause severe injury, death or fire. This project also uses parts outside of their original intended purpose. Although the configuration is safe, this project has not been tested at any safety laboratory and is not certified to be safe by any governing authority.
Steampunk Edison Bulb Parts List
- 1 – GE Vintage Style bulb ST19
- 1 – Lamp Cord
- 1 – Pull chain lamp socket
- 4 – ¾” X 4” Steel Pipe Nipples
- 2 – ¾” Steel Pipe Elbows
- 1 – ¾” Steel Pipe Tee
- 1 – ¾” Steel Pipe Cross
- 1 – ¾” Close Nipple
- 1 – ¾” Gate Valve
- 1- Plastic or rubber hose
- 1-3/4” Outside Diameter rubber grommet
Tools and Supplies
- Phillips Screwdriver
- Needle Nose Pliers
- Hot Glue Gun
- Gloves with rubber grip
- E6000 Epoxy Glue
- Electrical Tape
Order Parts
Pay close attention to the quantity needed when ordering parts.
Quantity – 1
Quantity – 1
Quantity – 1
Quantity – 4
Quantity – 2
Quantity – 1
Quantity – 1
Quantity – 1
Quantity – 1
Quantity – 1
Quantity – 1
Quantity – 1